Poured In Place Repair Kit

Repair holes and cracks in your poured in place playground surfacing with our easy-to-use and pre-measured poured in place rubber repair kit.

To repair deep holes within the bottom 2 inches, you will need the base layer kit. To repair surface holes within the top ½ inch, you will need the top layer kit.

Select from our 5 different colors: red/black, blue/black, green/black, tan/black, and black. Custom colors are available upon request. Contact us for more information.

Additional freight charges may apply – you will be contacted by SafetyFirst Playground Maintenance

This product is currently out of stock and unavailable.

SKU: N/A Category:

Description

Our poured in place rubber repair kits allow playground owners, associations, and organizations to repair their playground surfacing without contracting a vendor. Each kit includes pre-measured materials and instructions on how to repair your playground surface. Our poured in place rubber is made from recycled material components sourced from the USA.

Poured in place surfacing is a 2-layer system consisting of a base layer and top layer; the typical thickness range is 1-3/4″ to 5-1/2″. The poured in place rubber repair kit offers a top layer repair kit consisting of EPDM rubber and a bottom layer repair kit consisting of SBR rubber.

Depending on the depth of the hole or crack, you will need to purchase the top layer or base layer repair kit. How to select the correct kit type:

  • Top Layer Kit – repairing the top ½ inch of surfacing
  • Bottom Layer Kit – repairing the bottom 2 to 4 inches of surfacing (depth depends on fall height)

PIP repair kits come pre-measured with all the materials needed. You will need the following safety and maintenance equipment when using the kit.

  • Gloves
  • Googles
  • Trowel

Please use necessary safety measures when handling polyurethane rubber.

Additional information

Kit Type

Top Layer, Bottom Layer

Color

Red/Black, Blue/Black, Green/Black, Tan/Black, Black