Swing Hanger Commercial




The hanger is cast in two halves. The lower half of the swing hanger body has a shackle pendulum with a sintered bronze bearing incorporated into it to reduce wear. The two halves of the hangers are bolted together with a 12mm carriage bolt and a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder, so the bearing does not ride on the threads. This hanger fits a standard schedule 40 three-inch pipe

Lower half details:
Bearings do not need to be oiled as the bronze is impregnated with oil
1” wide pendulum wide and has a shackle with a bolt so that there is no need for a connecting S-hook.
Shackle pendulum is tamper-resistant
Requires our Clevis Wrench for installation

Swing Hanger details:
Lifespan: 2 years in harsh conditions and up to 5 years in optimal conditions
Tensile strength: 8600 lbs.”

Additional information

Weight4.85 lbs
Dimensions11 × 9 × 6 in

2 3/8", 3.5"